March Pump’s industrial LC-3CP-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 8.2 gallons per minute at 4 feet, and its maximum head is 14.1 Feet (or around 8PSI). The LC-3CP-MD pump may be used submerged or not submerged.
The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Cupric Nickel, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Stainless Steel, Polysulfone, and the Cord are also in contact with the solution. The inlet connection is 3/4 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 230V 0.05 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).
The maximum internal pressure the pump can tolerate is 25 PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius. The March LC-3CP-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals.
Perfect for Applications Including : Applications for the AC-3CP-MD Magnetic Drive Pump include ice makers, laboratory and medical equipment, vapor degreasers, and marine air conditioning systems.
Operation : Pumps are not self priming and will not produce a suction lift and must be installed with a positive flooded suction. We rely on the liquid being pumped to lubricate the impeller-magnet assembly spinning on the stationary spindle. The pump is not to run dry.
Max Flow : 8.2 GPM (31.2 LPM).
Max Head : 14.1 ft. (4.3 M).
Power : .05 HP (.037 K.W).
Electrical : 230V 50/60HZ.
Inlet : 3/4″ FPT.
Outlet : 1/2″ MPT.
